Two-component epoxy-polyurethane adhesive for gluing all types and sizes of parquet. Suitable for laying all types of parquet, larger dimensions (maximum length 2500mm, maximum width 200mm), such as laminate, board and classic parquet, decking, parquet from exotic types of wood, as well as already varnished parquet and underfloor heating.

Beige

substrate on which adhesive is applied has to be solid, flat, smooth, clean, dry, degreased and dusted. Content from component B pour in bowl with component A. Both components mix well with electric mixer. The adhesive should be applied with notched trowel

approx. 900-1500 g/m² depending on the type of parquet and the porosity of the substrate. Using Parfix primer reduces glue consumption and enhances glue adhesion. Using the appropriate PARFIX PU PRIMER reduces glue consumption, enhances glue adhesion and enables work with increased substrate humidity.

air temperature between +10˚C to +25˚C, relative air humidity between 45% and 65%, before, during and after laying the parquet. Substrate temperature min. +10˚C, concrete substrate humidity up to 2.00%, in case of higher humidity it is mandatory to use a suitable PU PRIMER. PU PRIMER, PU PRIMER RAPID, BLOCK 4.5 as moisture vapor barrier.

laying all types of parquet, larger dimensions (maximum length 2500mm, maximum width 200mm), such as laminate, board and classic parquet, decking, parquet from exotic types of wood, as well as already varnished parquet and underfloor heating

keep in original, well closed and undamaged packaging at temperature +5°C to +25°C, protected from direct sunlight

Water or wet tools should not get in touch with neither of components. Keep safe from frost

Component A and component B (comp. B is in plastic can with comp. A); 9kg + 1kg