One-component polyurethane adhesive, for repairing and fixing old wooden parquet that is not well attached and unstable or partially separated. It can be used for gluing wood to wood, as well as wood to concrete or mortar. It is used for all types of substrates, parquets and adhesives for the rehabilitation of hollows under the parquet as well as for fixing individual slats with point connection of floating floors. It is also used for larger areas by applying it with a brush or roller.

brown

before use, leave the adhesive to adjust at room temperature. Patting on the surface, identify and mark the area that needs to be repaired. Determine a place for drilling in the center of the marked area and stick adhesive tape (crepe tape) over it so as not to damage the surface. Drill a hole through the adhesive tape using a 4mm diameter drill. Inject adhesive with a syringe into the drilled hole. For rehabilitating larger surfaces, it is necessary to sand those surfaces so that the joints expand as much as possible. Next, apply the adhesive with a spatula or a roller to ensure full penetration into the joints. After drying, repeat the procedure if necessary. In the end, completely repaired surfaces should be sanded and other stages of parquet processing should be continued.

150-200 mlm² depending on the surface being treated.

injection, spatula or roller

+10˚C to +25˚C

1 to 3 days

after 24h

originally closed and stored in dry area, at temperatures from +15˚C to +25˚C

5l