Two-component, water-based, odorless polyurethane lacquer is used to protect all wooden sports floors, gymnastics halls and heavily loaded parquet surfaces.

Milky white / Transparent after drying

before using, the lacquer should be shaken well in the original packaging. Do not add water. Pour component B (hardener) into component A and shake well for 30-40 seconds. Wait for it to stand for 10-15 minutes, it is recommended to filter it before use. The layer of applied lacquer has a milky appearance that becomes completely transparent during drying. It is applied with a roller for water-based lacquers or with a brush in 2-3 layers on previously applied one layer of PARLACK BASIC PARQUET LACQUER, which has been previously polished and vacuumed. After drying, it is polished with mesh N°180-240 and vacuumed, then a second layer is applied. The finish layer of varnish reaches hardness after 72 hours. At least 5 days after the finish layer, the parquet surface must not be used or cleaned (hardening time of the varnish).

about 9-11 m²/l for one layer, depending on the wood porosity and the method of application

optimal working temperature from +15°C to +25°C, relative humidity between 65-80%

4h at 20°C, 65% relative humidity

Com.A:Com.B = 10:1 (by volume)

dry to the touch 1 hour and 30 minutes, reapply after 12 hours

matte 30-40%

interior

recommended for use on medium and heavily loaded surfaces

originally closed and properly stored product (dry, ventilated room, on wooden pallets) at temperatures from +5°C to +25°C. Protect from freezing

component A (5l) + component B (0.5l)