Composition: water dispersion, acrylic binder, pigments, fillers, and additives.

PREPARATION AND APPLICATION

Stir the product thoroughly before use. The product is ready to use and may be diluted with a maximum of 5% water. Apply to wood with a maximum moisture content of 15%, previously sanded with 150–180 grit sandpaper and thoroughly cleaned of dust.

The surface is touch-dry after 30–40 minutes and ready for sanding after 3–4 hours. The optimal working temperature is 20°C. Lower temperatures and higher air humidity will extend the drying time.

Do not apply in strong sunlight, rain, wind, or at temperatures below 8°C or above 25°C. The product can be applied by spray, brush, or roller. When repairing old coatings, the surface must be thoroughly degreased and sanded.

ADDITIONAL INFORMATION

Consumption: approximately 200–250 ml/m² per coat

STORAGE

Store in the original packaging, protected from direct sunlight, at temperatures between +5°C and +25°C.

SHELF LIFE

Two years from the date indicated on the packaging. DO NOT ALLOW THE COATING TO FREEZE!

After use, wash tools with water. Store unused coating in its original packaging. No special protective equipment is required. A protective mask and safety goggles should be worn only when applying the product by spray gun. In case of skin contact due to spillage, wash the affected area with soap and water.

If swallowed, seek medical attention. Keep out of reach of children.

PACKAGING

0.65 L

TRANSPORT PACKAGING

6/720 pallet