Coverage
First coat: 12 g/m²

Each additional coat: 8 g/m²

Drying time
Immediately after passing with the LED unit

Application temperature
+5°C to +40°C

Color: OLIWAX LED Color Oil is available in the same shades as OLIWAX 2K Color Oil.

Stir well before use!

IMPORTANT: During application, all windows must be darkened. OLIWAX LED Oil must not be exposed to direct sunlight. In contact with sunlight, the oil will dry instantly and become unusable. OLIWAX LED Oil is a hardwax oil intended for finishing wooden surfaces. It is designed for rapid curing and drying using LED technology. Like all OLIWAX products, it is based on specialized OLIWAX technology and combines the advantages of OLIWAX Color Oil and LED technology.

INSTRUCTIONS FOR USE

Industrial application:

1. Sand the surface with sandpaper up to grit 120.

2. After sanding, remove all dust.

3. Apply 1 coat of OLIWAX LED Oil with a roller.

4. Using 2 pads and 2 brushes, evenly distribute the oil.

5. Pass the surface through the LED Curing Industry Unit.

6. Repeat the process until the desired appearance is achieved.

Manual application (untreated surface):

1. Sand the surface up to grit 120.

2. Remove all dust and clean the surface with OLIWAX Surface Care.

3. Once the surface is dry, apply a small amount of OLIWAX LED Oil using a cloth or polishing machine with a thick red pad.

4. Work on smaller areas of 5–10 m².

5. Leave the oil for several minutes to allow the wood to absorb it, then remove excess oil using a cloth or machine with a thin white pad.

6. After the entire surface has been treated with OLIWAX LED Oil, cure it using the LED Curing On-Site Unit or a handheld LED unit for hard-to-reach areas and furniture.

7. Work in an organized and systematic manner – initial curing is crucial for the durability and quality of the final finish.

Do not walk on uncured parts of the surface.

SAFETY NOTES

Wash hands after handling OLIWAX LED Oil. May cause an allergic skin reaction. Keep out of reach of children. Causes serious eye irritation. Wear protective gloves and eye protection. Contaminated work clothing must not be taken out of the workplace. Do not handle the product until all safety instructions have been read.