PARFIX K209 GECKO
Permanently tacky product
Product ID: 61208156 - PARFIX K209 GECKOPermanently tacky product for fixing self-laying textile tiles (SL) and self-laying luxury vinyl tiles (LVT). Suitable for all substrates where installation is possible. Allows removal of tiles at any time, as well as replacement of existing ones.
■ ECONOMICAL APPLICATION
■ PERMANENTLY TACKY
■ FOR TEXTILE AND LVT TILES
■ FOR TEXTILE COVERINGS WITH FLEECE BACKING (SHEETS AND TILES)
■ SUITABLE FOR UNDERFLOOR HEATING
■ FOR RESIDENTIAL, COMMERCIAL, AND INDUSTRIAL AREAS
■ LOW CONSUMPTION
■ EASY REMOVAL AND REINSTALLATION OF COVERINGS
PRODUCT COLOR
White liquid
APPLICATION TEMPERATURE
From +10°C to +25°C
AIR HUMIDITY
<70%
COVERAGE
70–120 g/m²
OPEN TIME
30–60 min.
WAITING TIME
15–30 min.
WALKABILITY
After 2–4 h / Completely dry after 12 h
RECOMMENDED USE
Interior
ADDITIONAL INFORMATION
Instructions for use: The substrate must be solid, dry, clean, and free of materials that reduce adhesion. Apply PARFIX K209 Gecko evenly with a roller and allow it to dry until a thin transparent film is formed. On absorbent substrates, drying time is 15–30 min, while non-absorbent substrates require longer drying. Excessively thick layers or insufficient drying may cause unwanted adhesion. Install floor coverings and press them firmly into place (50 kg roller). The adhesive must not enter tile joints – mask them with tape or leave a gap. The floor can be walked on immediately after installation. The product does not prevent dimensional changes of the covering.