One-component polyurethane primer. It is used as a primer to improve adhesion on surfaces such as concrete, mortar, wood.

surface should be clean, solid, dry, pressure resistant, cleaned from dust and grease. Apply primer with roller with short pile or with fine paint brush. If the surface is highly absorbant, apply primer in two layers. Apply the second layer only after the first one has dried (2–3 hours). It could be used as a moisture vapour barrier on screeds up to 3% humidity, make sure to apply it in min. two layers until the substrate is completely saturated. Glue the parquet onto the clean surface within 24 to 72 hours only by using reactive adhesives PARFIX PU 101, PU 71, EPU 91 and SMP HYBRID

approx. 0,18-0,25 l/m² depending  on absorbtion and roughness of surface and way of application

optimal working temperature +18°C to +25°C with max. relative air humidity 60%. Do not use under +15°C

the humidity of the substrate when laying the parquet must not be higher than 2.00%, while with the application of PARFIX PU PRIMER RAPID the surface can contain up to max. 3.00% moisture

it is used as a primer to improve the adhesion on the surfaces such as concrete, mortar, wood

originally closed and correctly stored product, protected from direct sunlight, in dry room, at temperatures +5°C to +30°C